AIRLIFT
TECHNOLOGIES
The better alternative to the old fashioned windmill
© 1999-2011 Airlift Technologies
Airlift Technologies water pumping windmills.
Pump water on a bubble of air with a high performance Airlift Technologies water pumping windmill !
315' lift from the static water level, 1-30 gallons per minute, can locate up to 1/4 mile from well, no moving parts below ground, can be installed by one person in less than a day!
Aerates and de-ices as part of its water pumping process......No more chopping ice!
Airlift water pumping windmill pumps are maintenance free.
The unique Airlift Injection Pump can run dry accepting sand and sludge without harm, we are so confident in the durability of our pump that we guarantee it for life under normal use. Another added benefit of the Airlift injection pump is that it tends to oxygenate and purify the water as part of it's pumping process.
Airlift Technologies is a U.S. Based air lift windmill water pump company with the purpose of providing an effective, low-cost solution to your water pumping needs through the use of cutting edge windmill design and advanced air lift water pumping technology.
The Airlift Windmill is versatile and easy to use.
The Airlift’s unique windmill water pump system is capable of pumping up to 30 gallons per minute and has a maximum lift of 315' vertical and 500' horizontal. You can even use more than one windmill to service the same well or one windmill to service different wells. All Airlift water pumping windmill models are designed to be installed by one person in less than a day with no special tools or equipment.
Make life easy, buy an Airlift Windmill Today!
Airlift water pumping windmills are in operation in some of the hottest and coldest environments in the world
No moving parts below ground
Lifetime guarantee
On down hole pump
Installs in as little as two hours
No crane, crew or special tools required
Other water pumping windmill designs are limited in their water pumping capabilities.
Our windmill pump is designed without the use of leathers, or plunger type assemblies, therefore, there are no moving parts down in the well that have to be replaced year after year, The only maintenance is to change the lubricant and clean the filter on the compressor annually. Other windmills must be placed over the well, the Airlift water pumping windmill can be placed anywhere the wind blows the best, up to 1/4 mile away for maximum water pumping capabilities, so it is very cost effective.
Airlift windmills are built tough.
All Airlift water pumping windmill models come standard with 6061 T6 aluminum blades, Cast iron industrial compressor,17-4 investment cast stainless steel turn out assembly and hub, rust proof galvanized inlet and brass outlet piping, tapered roller bearings at the tower mount and tail pivot points for smooth non binding operation.
Airlift windmills can also aerate and de-ice ponds and trough tanks, great for livestock !
For those with ponds by simply adding a diffuser to the Airlift Windmill water pump will be able to aerate and de-ice your pond as a dedicated aerator, also an Airlift Windmill aerates and oxygenates as part of its pumping process. All Airlift Windmill systems are designed to be in operation year round, so there is no need to shut down for the winter, just continue pumping year round.
For cattle ranchers or on the farm, the Airlift Windmill water pump will keep your cattle trough tanks open year round without fear of damage to the Airlift Windmill by freezing unlike the old fashioned windmill.
Airlift water pumping windmill will even work with no wind.
The Airlift Windmill Injection Pump is capable of pumping on days of no wind by adding an extra air line attached to an auxiliary powered grid electric, solar or gas air compressor.
